Motortronics Agility Series Soft Starter suitable for starting standard three phase induction motors to 132kW (200HP) at 242A.

Rated to suit motors and Trip Class Ratings:

45kW, 160A at 230V - Trip Class 37, 55kW, 195A at 230V - Trip Class 20, 75kW, 242A at 230V - Trip Class 10.
90kW, 160A at 400V - Trip Class 30. 110kW, 195A at 400V - Trip Class 20, 132kW, 242A at 400V - Trip Class 10.
90kW, 160A at 500V - Trip Class 30. 132kW, 195A at 500V - Trip Class 20, 160kW, 242A at 500V - Trip Class 10.

The Agility frame 3 soft starters have an integral fan.

Main Circuit IP00: (IP20 with optional finger guard). Control Circuit IP20.

Frame 3 Dimesnsions: 490mm high x 205mm wide x 332mm deep.
Weight: 15kg.

Features include:

• Integral OLED Display for fast programming.
• 2 x Digital Inputs (24Vdc or 110Vac or 230Vac +/-10% voltage dependent voltage applied to D1-2 Com terminals)
• 1 x Run Relay
• 1 x Fault Relay
• USB terminal for firmware upgrades and data logging
• Modbus RTU Fieldbus communications port built in.

Input Voltage: 200Vac to 600Vac, at 50/60Hz +/- 10%

Recommended fuses can be found in the Quick Start Guide
Aux supply options: Requires optional power supply AGY-020 for Single Phase 110V or 230V ac rms.

Cubicle mount:

Ventilation space above and below: 100mm
Ventilation space at sides: 40mm
Ventilation space in front: 25mm
Mounting via 4 bolts at rear on 283mm x 75mm centres.
Operating Temp: -20°C to 40°C. Above 40°C derate linearly by 2% per °C to a maximum of 60°C
Heat loss: 90W.

Manufacturer part number is VMX-AGY-301-6-01 (was AGY-301-6-01)