Motortronics Agility Series Soft Starter suitable for starting standard three phase induction motors to 160kW (215HP) at 302A

The Agility frame 3 soft starters have an integral fan.

Main Circuit IP00: (IP20 with optional finger guard). Control Circuit IP20.

Frame 3 Dimesnsions: 490mm high x 205mm wide x 332mm deep.
Weight: 15kg.

Features include:

Integral OLED Display for fast programming.
2 x Digital Inputs (24Vdc or 110Vac or 230Vac +/-10% voltage dependent voltage applied to D1-2 Com terminals)
1 x Run Relay, 1 x Fault Relay.
USB terminal for firmware upgrades and data logging..
Modbus RTU Fieldbus communications port built in.

Input Voltage:

200Vac to 600Vac, at 50/60Hz +/- 10%
Recommended fuses can be found in the Quick Start Guide
Aux supply options: Requires optional power supply AGY-020 for Single Phase 110V or 230V ac rms.

Cubicle mount:

Ventilation space above and below: 100mm
Ventilation space at sides: 40mm
Ventilation space in front: 25mm
Mounting via 4 bolts at rear on 283mm x 75mm centres.
Operating Temp: -20°C to 40°C. Above 40°C derate linearly by 2% per °C to a maximum of 60°C
Heat loss: 139W.

Manufacturer part number is VMX-AGY-303-6-01 (was AGY-303-6-01)