Motortronics Agility Series Soft Starter suitable for starting standard three phase induction motors to 45kW (75HP) at 80A

Rated to suit motors and Trip Class Ratings:

15kW, 55A at 230V - Trip Class 30, 18.5kW, 80A at 230V - Trip Class 20, 22kW, 80A at 230V - Trip Class 10.
30kW, 55A at 400V - Trip Class 30. 37kW, 66A at 400V - Trip Class 20, 45kW, 80A at 400V - Trip Class 10.
37kW, 55A at 500V - Trip Class 30. 45kW, 66A at 500V - Trip Class 20, 55kW, 80A at 500V - Trip Class 10.

Up to 5 starts per hour as standard, Up to 40 starts per hour if optional fan AGY-031 is fitted.

Main Circuit IP00 (IP20 with optional finger guard). Control Circuit IP20.

Frame 2 Dimensions: 296mm high x147mm wide x 237mm deep.
Weight: 6kg.

Features include:

• Integral OLED Display for fast programming.
• 2 x Digital Inputs (24Vdc or 110Vac or 230Vac +/-10% voltage dependent voltage applied to D1-2 Com terminals)
• 1 x Run Relay
• 1 x Fault Relay
• USB terminal for firmware upgrades and data logging
• Modbus RTU Fieldbus communications port built in

Input Voltage:

200Vac to 600Vac, at 50/60Hz +/- 10%
Recommended fuses can be found in the Quick Start Guide
Aux supply options: Requires optional power supply AGY-020 for Single Phase 110V or 230V ac rms.

Cubicle mount:

Ventilation space above and below: 100mm
Ventilation space at sides: 40mm
Ventilation space in front: 25mm
Mounting via 4 bolts at rear on 283mm x 75mm centres.
Operating Temp: -20°C to 40°C. Above 40°C derate linearly by 2% per °C to a maximum of 60°C
Heat loss: 37W.